Maximum Auto. Welding Current: At 60% D.C (Amp) - 220 At 100% D.C (Amp) - 160
Open Circuit Voltage Range (Volt): 16 To 36
Max. Auto Power Rating: At 60% D.C. (KVA) - 8.0 At 100% D.C. (KVA)) - 6.5
Cooling (Type) : FORCED AIR
Input Supply Voltage (Voltage/Phase/Hz) : 415V, 3PH, 50HZ
Weight (Approx.) (KG): 140
Wire Feeder: JJA W-2.5D
Drive Mechanism (Type): D.C. Motor With G.Box
Wire Drive Type : 2 Roll
Suitable For Wires DIA/MM : 0.8
Input Supply Volts : 42 V From P.S.
Weight (Approx.) (KG): 14
Features:
Most reliable and dependable workhorse welding machines with proven economy
Rugged design, reliable performance and superior arc characteristics
Diode based power source with traditional tapped transformer, provided with switch on front panel for step control of voltage, enabling welder to obtain the desired arc voltage with ease
User friendly selection of 2 track / 4track operation for zero defect GMAW welding
Good and consistent weld quality with low hydrogen content
Minimizing the unproductive time and thus increasing the productivity on the shop floor
Standard Package comprises of Power Source, Wire feeder (2 Roll Drive) with 5 meter interconnection and Welding Torch only
Recommended for All position MIG / MAG welding applications
Suitable for welding of wide range of metals like Carbon Steel, Stainless Steel and other steel alloys, with appropriate or recommended consumable
High volume thin sheet metal fabrication welding as in Auto Industries and other engineering industries, maintenance and repair workshops
Most ideal for Auto Ancillary units – for increased productivity and quality welding applications
JJA MIG - 3D
Power Source: JJM D-300
Maximum Auto. Welding Current: At 60% D.C (Amp) - 300 At 100% D.C (Amp) - 220
Open Circuit Voltage Range (Volt): 16 To 45
Max. Auto Power Rating: At 60% D.C. (KVA) - 13.5 At 100% D.C. (KVA)) - 10.0
Cooling (Type) : FORCED AIR
Input Supply Voltage (Voltage/Phase/Hz) : 415V, 3PH, 50HZ
Weight (Approx.) (KG): 160
Wire Feeder: JJM W-300
Drive Mechanism (Type): D.C. Motor With G.Box
Wire Drive Type : 2 Roll
Suitable For Wires DIA/MM : 0.8
Input Supply Volts : 42 V From P.S.
Weight (Approx.) (KG): 14
Features:
Most reliable and dependable workhorse welding machines with proven economy
Rugged design, reliable performance and superior arc characteristics
Diode based power source with traditional tapped transformer, provided with switch on front panel for step control of voltage, enabling welder to obtain the desired arc voltage with ease
User friendly selection of 2 track / 4track operation for zero defect GMAW welding
Good and consistent weld quality with low hydrogen content
minimizing the unproductive time and thus increasing the productivity on the shop floor
Standard Package comprises of Power Source, Wire feeder, Flow meter, Regulator, Preheater, 3m interconnection cable, 2.5m Welding cable, 1.5m Earthing Cable and Welding Torch only
Recommended for All position MIG / MAG welding applications
Suitable for welding of wide range of metals like Carbon Steel, Stainless Steel and other steel alloys, with appropriate or recommended consumable
High volume thin sheet metal fabrication welding as in Auto Industries and other engineering industries, maintenance and repair workshops
Most ideal for Auto Ancillary units – for increased productivity and quality welding applications
JJA MIG - 4D
Power Source: JJM D-400
Maximum Auto. Welding Current: At 60% D.C (Amp) - 400 At 100% D.C (Amp) - 310
Open Circuit Voltage Range (Volt): 17 To 55
Max. Auto Power Rating: At 60% D.C. (KVA) - 22.0 At 100% D.C. (KVA)) - 17.0
Cooling (Type) : FORCED AIR
Input Supply Voltage (Voltage/Phase/Hz) : 415V, 3PH, 50HZ
Weight (Approx.) (KG): 2200
Wire Feeder: JJM W-400
Drive Mechanism (Type): D.C. Motor With G.Box
Wire Drive Type : 2 Roll
Suitable For Wires DIA/MM : 0.8/1.2
Input Supply Volts : 42 V From P.S.
Weight (Approx.) (KG): 14
Features:
Most reliable and dependable workhorse welding machines with proven economy
Rugged design, reliable performance and superior arc characteristics
Diode based power source with traditional tapped transformer, provided with switch on front panel for step control of voltage, enabling welder to obtain the desired arc voltage with ease
Good and consistent weld quality with low hydrogen content
minimizing the unproductive time and thus increasing the productivity on the shop floor
Standard Package comprises of Power Source, Wire feeder, Flow meter, Regulator, Preheater, 3m interconnection cable, 2.5m Welding cable, 1.5m Earthing Cable and Welding Torch only
Recommended for All position MIG / MAG welding applications
Suitable for welding of wide range of metals like Carbon Steel, Stainless Steel and other steel alloys, with appropriate or recommended consumable
Ideally recommended for heavy duty MIG / MAG welding applications like crane structure components manufacturing, 3 shift use, rough handling on the shop-floor and fabrication shops where maintenance staff is not very qualified